How To Add VSLogger to Adutante 

Single Adutante Server and several VSLogger servers can be configured into a distributed multi-recorder system with shared user-base.

To add a recorder to Adutante Recording system, there are three steps:

1. Add recorder record in Adutante Recorders module. 
2. Install and configure VSLogger server 
3. Use CLI Tool to register with Adutante server 

To remove recorder from Adutante Recording system, there are two steps:

1. Unregister and, optionally, delete the recorder record from Adutante Recorders module. 
2. Decommission VSLogger server or, optionally, register recorder with different Adutante instance 

Add or Remove recorder record in Adutante Recorders module.

See Recorders Administration

Install VSLogger server

For installation instructions refer to Quick Installation Guide 

Use CLI Tool to register with Adutante server 

How to use CLI Tool - refer to CLI Tool Overview

CLI tool recorder registration sequence.  

login>

->u admin p admin
Today is: Thu Apr 02 01:30:39 UTC 2015

cli>
->config

cli>(config)

->adutante

cli>(config-adutante)

-> register host https://localhost:8443 id VSLOGGER1

.... recorder reloads here