Adutante Registration| Call Recording Reference

VSLogger - Adutante Registration

To enable user connections, Call Center and QC features, VSLogger must be registered with Adutante Server

CLI (Command Line Interface)

How to use CLI Tool - refer to CLI Tool Overview

GUI (Graphical User Interface)

cli>(config)

->adutante

cli>(config-adutante)
->?
register host [host] id [prvdid] - register with adutante
update - update registered provider
help|? - embedded help
exit - exit current configuration mode
reset - reset adutante connection
show - show current configuration

cli>(config-adutante)

The following menu can be reached by navigating to Setup->Adutante
Gallery: adureg-1

Adutante Parameters

GUI Setting	Command Format	Description	Extra Notes
	`register host [host] id [prvdid]`	`register with adutante`	host - url of the adutante server, e.g. https://192.168.42.16:8443 id - recorder name. Prior to registration, Recorder entry for this VSLogger instance should be created on Adutante server. see Adutante Recorders Administration
	`update`	`update registered provider`	send UPDATE command to Adutante. UPDATE command usually sent on recording service restart. You can issue this command if you wish for VSLogger to perform UPDATE sequence without restart of the recording service. For example, you suspect that Call Center settings: Agents Lists, Clients, Seating changes or new QC forms added or removed and you want this VSLogger instance updated without a restart. Similar command can be issued from Adutante see Adutante Recorders Administration, Reset command.